LSIrish.com free printable patterns for wood carving, pyrography

Apr 24 2014

Pyrography Doodle #7

6 Comments / Pyrography Projects / By irish

Today we will put our Mushroom Pyrography Doodle project together to create a desktop note board. The finished project also makes a great recipe holder for your kitchen. If you are just joining this project, please follow the links below for the free step-by-step insturctions and pyrography pattern for this free Lora S. Irish wood burning pattern.

Pyrography Doodles
Pyrography Doodles #2
Pyrography Doodles #3
Pyrography Doodles #4
Pyrography Doodles #5
Pyrography Doodles #6
Pyrography Doodles #7

Please drop by our carving and pyrography pattern website, Art Designs Studio, to get your free mushroom pyrography patterns that complement this project. The pattern package is on our home page. The links to the previous posts for this free project are below.

Step 15:Finishing Your Project

1. Lightly sand your work using a fine grit nail foam core pad or board. Wipe any sanding dust with a dry cloth.

2. Cut your cork board to 5 1/2” wide x 10 1/2” high, using a sharp craft knife. Round the corners using a jar or bottle lid as your guide.
Cut a sheet of computer paper the same size and shape as the cork. We will use the paper to protect the cork during the sealing steps.

3. Spread an even layer of yellow carpenter’s glue to the back of the cork board. Lay the cork onto your plywood, 3/4” from the right side of the plywood and 1/2” inch from the top – aligning it with the burned design.

4. Lay several heavy books on top of the cork, to apply pressure, and allow the glue to dry completely.

5. Using hot glue, circle the outer edge of the cork board with one strand of sea grass. Begin your gluing at the center of the bottom edge of the cork.

6. Using hot glue, circle the outer edge of the plywood with one strand of sea grass. Begin your gluing at one lower corner of the plywood.

7. Lay the cut computer paper over the cork area of your project. Thumbtack into place. Use a spray sealer, following the directions on the label, to seal your burning. The computer paper will protect your cork from the spray application.

8. Cut your basswood board to measure 12″ long by 3 3/4″ wide. Draw a diagonal line from corner to corner on the basswood. Using either a small cabinet saw or your craft knife, cut along the line to create two triangles. Sand the cut edge of each triangle piece of basswood. Using yellow carpenter’s glue, glue the triangle supports to the back of the plywood to create legs. Place the basswood legs 2” from the sides of the plywood, with the long diagonal cut edge against the plywood.

Thank you for joining me in this fun pyrography, wood burning project.

That’s it!!! If you are ready for more great patterns and designs that you can use in your pyrography doodle projects please see our new Lora Irish pattern package, Pyrography Doodles at Art Designs Studio. This exclusive package includes 300 doodle designs that you can use in your pyrography, 26 carving and pyrography patterns, 10 finished doodle samples, and 3 border patterns.

Pyrography Doodle #7 Read More »

Apr 23 2014

Pyrography Doodles #6

4 Comments / Pyrography Projects / By irish

Let’s finish up the pyrography wood burning steps for our Doodle Mushroom design. During these steps we will fill the large mushroom’s stem, work the foreground mushrooms, and then work a general check of the work accomplished.

Pyrograhy Doodles Page 1
Pyrograhy Doodles Page 2
Pyrograhy Doodles Page 3
Pyrograhy Doodles Page 4
Pyrograhy Doodles Page 5
Pyrograhy Doodles Page 6
Pyrograhy Doodles Page 7

Step 12: Pattern Fill the Stem

The large mushroom stem uses a large flower design with a curve-sectioned center, a ring of small spirals, and then layers of serrated petals. Use the serrated petals to fill the space between your flowers.

Step 13: Working the Front Mushrooms

Follow the doodle pattern placement guide and work the foreground mushrooms. Use a dark-medium setting throughout this burn.

Step 14: Finishing the Shading

Check your shading to strengthen any area that needs deeper tonal value work. Also check your doodle patterns for tonal value. You can re-burn any doodle pattern to add more value, if needed.

Tomorrow we will do the finishing steps to turn this Pyrography Doodle Mushroom wood burning into a desktop note board or kitchen recipe board. See you then and thank you for reading.

Pyrography Doodles #6 Read More »

Apr 22 2014

Pyrography Doodles #5

3 Comments / Pyrography Projects / By irish

Today we will fill the top of the mushroom cap with a large doodle pattern, then adding graduated shading to the cap. Please drop by our carving and pyrography pattern website, Art Designs Studio, to get your free mushroom pyrography patterns that complement this project. The pattern package is on our home page. The links to the previous posts for this free project are below.

Pyrograhy Doodles Page 1
Pyrograhy Doodles Page 2
Pyrograhy Doodles Page 3
Pyrograhy Doodles Page 4
Pyrograhy Doodles Page 5
Pyrograhy Doodles Page 6
Pyrograhy Doodles Page 7

Step 9: Doodle the Top Cap

The pattern on the mushroom cap is a very large flower pattern with long leaves, butterflies, and small daisies. Begin the large flower at the top of the mushroom cap. As you work the doodle pattern towards the outer edges of the mushroom cap begin filling using small daisies. Add as many butterflies as you would like.

Step 10: Shading the Cap

A second shading is worked over the entire large mushroom to deepen the tonal value along the outer edges and behind the leaf curl. Leave the mushroom spots unworked, the white of the wood.

Step 11: Working a Second Layer of Shading

To push the background leaves even deeper into the design, a third layer of shading is added. Please follow the shaded drawing guide for your shading placement.

Please remember these are large images that you can right-hand click and save to your desktop.

See you tomorrow!

Pyrography Doodles #5 Read More »

Apr 21 2014

Pyrography Doodles #4

3 Comments / Pyrography Projects / By irish

Small doodle patterns can be used to create the fill textures inside the sections of any pattern, adding delightful little designs to your work. Those doodles can be repeat patterns, random fills, or large, fully complete designs. In today’s step we will work a large floral pattern in the underside of our mushroom cap.

To provide a clear, easy-to-follow, easy-to-print image, the photos on this page are fairly large. Please be patient as they load to your browser. Click on any of the images to open them, full sized, in a new window. Right hand click on the image and save it to your desktop.

Step 6 Completing the Leaves

To create more tonal values in the overall mushroom design, turn your temperature setting down to a dark-pale setting. Work the doodle fill patterns into each section, following the pattern guide. Note that the designs and patterns of the doodles are still strong even though they are worked at a pale value.

If you missed the beginning posts to this free pyrography project:
Pyrograhy Doodles Page 1
Pyrograhy Doodles Page 2
Pyrograhy Doodles Page 3
Pyrograhy Doodles Page 4
Pyrograhy Doodles Page 5
Pyrograhy Doodles Page 6
Pyrograhy Doodles Page 7

Step 7: Shading the Mushroom

Using a common fill pattern, shade the mushroom cap, underside, and stem. Work the shading on the left side of each area, with the darkest tonal values along the outer edge of each area. Follow the shaded drawing for placement.

Step 8: Fill the Underside of the Cap

Fill the underside of the mushroom with the large flower pattern shown on that step page. This pattern features a double scroll center with an inner ring of five petals and an outer ring of scalloped petals. Add more scalloped petals between the flowers to fill the space between each flower.

For more great patterns to use with this project, please visit our Pyrography Doodles Pattern Package on our pattern website, Art Designs Studio.

Pyrography Doodles #4 Read More »

Apr 18 2014

Pyrography Doodles #3

3 Comments / Pyrography Projects / By irish

Pyrograhy Doodles Page 1
Pyrograhy Doodles Page 2
Pyrograhy Doodles Page 3
Pyrograhy Doodles Page 4
Pyrograhy Doodles Page 5
Pyrograhy Doodles Page 6
Pyrograhy Doodles Page 7

The images on this page are sized to print an 8 1/2″ x 11″ guide sheet which includes your sepia temperature setting, a close-up of the burning, the pyrography shading guide, and the doodle patterns used in that step. Please be patient as the image loads. Click on the image, allow it to load in a new window, right-hand click on the image, and choose Save to your Desktop.

Step 3: Medium Dark Leaf Patterns

To establish the mid-range of your tonal value, begin your pattern burns using a medium-hot setting on your tonal value scale.
Each fill pattern is a complete, small design within the boundaries of that section of the larger pattern. Work the patterns with a fine line tip – either a ball tip or looped tip pen. Work the patterns right to the edge of each section to give the impression that were the outlines not there the pattern would continue into the background.

For the first doodle patterns, shown in this step, I used simple repeats of small flowers, scales, and spirals.

Step 4: Shading Background Areas

An unshaded background for your pattern fills allows the white of the wood to show through your line work. You can work a common, shading fill over a section first, then lay your pattern work over that shading to darken the tonal value of the entire section. This technique allows you to have a mid-toned background with a dark line doodle.

You can also burn your doodle pattern first then shade over that section to darken the total tonal value of that section. This technique will darken both the background and the line doodle.

After these sections are shade the dark fill leaves are worked at a medium-hot setting to create the tonal value of pattern fill at the same color depth as the outlines of your pattern.

Step 5: Laying Patterns over Shading

Continue your pattern fill doodles over the shaded leaf sections noted in this step. Work towards creating even thickness lines and consistent tonal values.

We will continue our Pyrography Mushroom Doodles on Monday, see you there and then. We will continue to fill this mushroom pyrography doodle pattern with fun and easy to create doodle designs. Please slip over to our craft, carving, and pyrography patterns website, Art Designs Studio, to get your free patterns for this project. The download link is on our home page.

Pyrography Doodles #3 Read More »