DIY Eclectic Primitive Pallet Dresser

DIY Pallet Wood DresserEclectic means to derive an idea, style, or taste from a broad and diverse range of sources. In this case, my primitive bureau is a conglomeration of some of the many ‘someday’ bits, pieces, boards, and hardware that have accumulated in the shop over the years. You probably have boxes of them, those little parts that you know someday you will need or want.

Over the many years of wood carving and wood working I have enjoyed trying my hand at a smattering of furniture projects. Our woodworking shop is well equipped with the basic power tools, as well as many fun specialty tools that are used to create precision cuts and glass smooth finishes. Unfortunately with my husband’s illness and my Mom’s advanced age I seldom can take the time away from the family to dedicate to the hours of work that it takes to produce a classic piece of furniture.

But I will admit that I have missed that part of wood working tremendously. So this weekend I decided to indulge myself in a little back porch wood butchery … grin!

This all began with a Friday afternoon yard sale purchase of a 24” wide, 36” high, 8” deep used, battered bookcase. It was painted wedgewood blue, with lots of scratches and dents, and had a broken kick board (toe board). I knew I didn’t need another bookcase when I bought it, but it is solid wood and priced at only $5.

DIY Pallet Wood DresserSunday morning came and I headed to the shop to grab a board to replace the kick board … that seemed a good place to start. Passing the tractor shed, which is an add-on to the workshop, I noticed a bunch of old pallets that I had picked up somewhere for one of those ‘someday’ projects. I stopped, looked the pallets over carefully, and made the decision that today was that someday! That yard sale bookcase did not have to stay a bookcase, it could become the carcass for a set of dresser drawers made out of the pallet wood.

Since I really couldn’t hide out in the wood shop this weekend I grabbed up the zaw-zaw, the jig saw, and the disc sander. With a few hand tools – dovetail saw, rough cut saw, screw drivers, that sort of thing – I turned the back porch into a weekend work area where I could be close at hand for the family while doing some fun wood butchering.

DIY Pallet Wood DresserThe first goal was to convert the bookcase into a chest of drawers without purchasing anything – I wanted to use the wood and hardware that I had on hand. My second goal was to accept that this would not be perfect – I knew that using the tools that I could carry to the porch I would not be making precise, accurate cuts or joints.   So this project started out as an eclectic primitive project.


  1. Using the zaw-zaw, hammer, and a crow bar, I cut the pallets apart. A nail set and hammer removed the cut nails from the boards. A light sanding with 80-grit paper removed the worst of the splinters and fuzz bunnies.
  2. I decided that I wanted a series of small drawers, so I used some ½” x 1” framing strips to make the drawer supports.   These strips were left-overs from a repair for a door frame. The bookcase has three shelves, so I divided each shelf area into space for two drawers. Some wood glue and a few screws secured the drawer supports to the inside of the bookcase.
  3. The drawers are just simple butt-joint boxes with ¼” plywood floors. I made each box ½” less wide than the inside width of the shelf and ½” shorter than the height of the drawer area. No two drawer areas turned out to be the same. The drawer sides were made out of pallet wood and the plywood was left-over from my pyrography projects.
  4. The drawer fronts were cut from pallet wood at the full width of the bookcase and tall enough to cover the ½” of the shelf support. I tried to allow about ¼” air space between each drawer. The fronts were attached with screws, working from the inside of the box.
  5. Because pallet boards are often cracked, split, or broken, I quickly realized I would not have enough boards to create six 24” wide drawer fronts. But going through the cut pieces left from the first several drawers I did have enough to turn one large drawer area into two small drawers.
  6. DIY Pallet Wood DresserI removed the broken kick board and replaced it with pallet wood.
  7. I needed drawer pulls, so while rooting through my someday boxes I came across five old glass knobs from Mike’s father’s woodworking days. Two ceramic knobs turned up in one of my Dad’s boxes.
  8. The top of the bookcase was in very bad condition, so I cut a new top from an old walnut table leaf. The table was long gone, but I had held onto the extension leaf for years. The top is held in place with screws working from the inside of the bookcase – dresser carcass.
  9. While looking for drawer knobs I stumbled across an old, discarded bathroom mirror and then found a pair of wrought iron shelf brackets. The brackets were so old the plastic packaging had turned yellow, and cracked. A simple butt-joint frame made from pallet wood scraps became the mirror support. Two long pallet boards were mounted to the back of the frame to attach the mirror to the back of the case. For a little added pizzazz I used the iron shelf brackets on the top of the dresser to also attach the mirror.

So … the photos show you where I am. The woodworking is done except to sand off a few really rough areas. I know that I am going to paint over the wedgewood blue with first a medium tan and then black. With sandpaper I will rough up the corners and edges to let all three paint colors show.

Pallet Wood Dresser Pineapple CrochetThe whole family has become involved in this project. Mom would like to see me paint lettering to the pallet boards – fragile, this side up, or even hazardous waste. I am thinking adding luggage stickers or packing slips to the boards, then roughing them up so it looks as if the dresser is made from antique shipping crates. Mike, my beloved hubby, wants me to remove the glass knobs and carve wood spirit faces as my drawer pulls and he wants it for his knife collection storage. All my son will say is, “Gee, that will look awfully good in the corner of my room!” I’ll let you know when we decide where this project goes from here.

I just may keep this one for me.  Whosits!  A gal needs some special place to store her doily crochet books, hooks, and pineapple work.

In the meantime, have some fun this coming weekend doing your own eclectic primitive pallet wood project! Oh, and the total cost of this project was $5 for the bookcase and a full day of absolute fun, plus the joy of putting some of those ‘someday’ bits and pieces to work.


Weekend Whittler #002

Weekend Whittler Wood Carving Newsletter, 2014, Issue #002

Carving Tool Handle Styles

Carving tools come with a variety of tool handle styles, let’s take this time to look at the most common and their specific uses. Shown in the photo above, left to right: palm grip, long straight handled, palm grip, tapered grip, and ergonomic.

Palm handles have a short length from the shaft of the cutting blade and end with a wide, bulbous shape that fits in the center of the palm. The weight of your entire arm from the elbow through the hand is directed by the palm handle into the push cuts of the tool. Palm tools are perfect for long, straight, deep cuts that need a little extra pressure.

Straight handled or long handled tools are griped with the handle reaching across the diagonal of the cutting hand palm. The handle is often 3/4″ or wider in diameter to insecure a solid grip. This handle grip places the cutting stroke in the hand and wrist and gives you total control over small, short, and delicate cuts.

Pencil handled styled carving tools have a wooden or plastic handle approximately 1/2″ in diameter or less, much like a large kindergarten style pencil. These narrow long handles are great for very fine detail work because they are very responsive to small changes in your hand position against the wood.

Thick, long, straight handles are used on carving tools to be worked with a leather or rubber mallet. The extra width prevents the handle from cracking after repeated mallet hits. Often a mallet handle tool will have one or more metal bands at the top of the handle to add more strength.

Ergonomic tool handles are becoming more readily available for the hobby carver. This style is formed to fit within the spaces of your fingers to give a stronger grip during use.

Ergonomic handles are not for everyone, they are not a one size fits all shape.If you have an average or large sized hand they work nicely, but often those with small hands will find the finger shapes along the bottom edge of the handle are too widely spaced for comfort.

Most wood carvers will have a variety of tool handles in their carving kit, ready for use for each of the different types of carving needed to complete a project. There are several excellent beginner/intermediate tool sets on the market that can get you started.

No matter which handle style you chose you can increase your gripping power by adding one or two wraps of flexible self-adhesive bandage around your tool handle. It is easy to apply, easy to remove, and if you have arthritis it can make carving much more comfortable for your fingers and joints.


wood carving setail bench knife

If you would like to comment on this issue of the Weekend Whittler Wood Carving Newsletter, please email our studio.
Copyright, Lora S. Irish, Art Designs Studio, 2014, All International Rights Reserved
Chip Carving Basics E-Project by Lora IrishFor more great e-Projects & e-Books visit

Chip Carving e-Project by Lora Irish

37 page, PDF file format, e-project and the
full cp015 Chip Carving Pattern package
with 100 ready -to-print chip carving patterns.

Supplies needed for chip carving
Creating basswood chip carving practice boards
Knife sharpening
Transferring a chip pattern to your board
Styles of chips – triangles, square, straight-wall,
curve-edge, free form, and accent chips

Work a set of chip progressions


Scroll to Top