Drawing and Painting

Painted Blue Jeans 2, Free Craft Patterns

Doodle Days #13 –  Blue Jean Painting, Wood Burn Spoons, Wood Carved Spoons, Leather Work, Free Lora S. Irish Patterns to Download, DIY Bookmaking, Bullet Journals, Scrap Booking, Card Making, Applique Quilting, Pyrography, Wood Carving

Painted Blue Jeans using our Free Doodle Patterns

how to paint blue jeans

Supplies:

1 pair of medium-blue blue jeans
1 cork-backed ruler
1-3 fine-point black fabric pens
1 set of 18 to 24 colors, medium-point fabric marking pens
1 set of assorted color fabric marking pens
1 piece of scrap cardboard, large enough to slide inside the pant’s leg
steam iron

Colore Dual Tip Fabric Markers

Super Markers Fabric and T-Shirt Permanent Ink Pens

Best 24 Colors Fabric Markers

Sharpie Fine Point Markers, 36 piece set

Apple Barrel Acrylic Paint Set, 18 Piece

 

how to paint blue jeans

Step 1:  Pre-wash your jeans to remove any starch or stabilizing chemicals.  Dry the jeans thoroughly before you begin painting.

free craft patterns
Free Doodle Pattern #043

Step 2:  Download your copies of our Free Doodle Patterns, here on LSIrish.com.  Type doodles into the search box in the header.  We are on numbers 043 to 045 today, which should give you a nice selection of designs to use.

Step 3:  Cut the scrap cardboard to fit inside of the pant’s leg, so that one end of the cardboard comes out the pant’s leg at the bottom.  You can move this cardboard as you work to protect the jeans from color blending through to the other side of the jeans.

Step 4:  With a black fabric marking pen begin doodling … use a light pressure on the pen tip for the smoothest and fullest line coverage.  Mix your main designs with long flowing line breaks and fill patterns.

free craft patterns
Free Doodle Pattern #044

Step 5:  Use a cork-backed ruler, laid along the inner leg seam line for your measurements for the edge trim design.  The cork will grab the fabric, keeping the ruler in place as you work.  My inner leg trim was worked at 1/2″ measurements.

Step 6: Have fun adding colors to your design.  Fill in some areas with a solid coloring, and in others just add a touch of line work.  Let some areas remain unpainted to allow the blue jean color to become part of your design.

Step 7:  Set your fabric pen colors according to your package directions.  My set only required a hot, steam pressing to become permanent coloring.

free craft patterns
Free Doodle Pattern #045

Step 8:  Flip your jeans over and do the back side of the leg.

Step 9:  You can create doodle designs on  the 6 1/2″ square white cotton fabric pieces using this same method and add them to your pants.  Fill in some areas of your pattern with the bright colors from your set.  After the patch has been hot, steam ironed it is ready to sew into place, anywhere on your doodle jeans.

 

 

 

how to paint blue jeans

Steam Punk Pattern Pack at Lora S. Irish’ pattern website, ArtDesignsStudio.com

0
painted blue jeans

Painted Blue Jeans, Free Patterns

What could be more perfect for our Free Doodle Patterns than a pair of blue jeans?  How about the fact that I picked up these brand-new, never worn jeans at my local church thrift shop for $1 !

Doodle Days #13 –  Blue Jean Painting, Wood Burn Spoons, Wood Carved Spoons, Leather Work, Free Lora S. Irish Patterns to Download, DIY Bookmaking, Bullet Journals, Scrap Booking, Card Making, Applique Quilting, Pyrography, Wood Carving

free painted blue jeans patterns

Why wear your slogan or favor designs on the sleeve of your t-shirt when you can paint them onto the legs of your favorite pair of blue jeans?

 

Supplies:

1 pair of pale-blue or medium-blue blue jeans
1 fine-point black fabric pen
medium-point fabric marking pens – black, medium-blue, and pale-blue
1 set of assorted color fabric marking pens
several 6 1/2″ squares of white cotton fabric
needle and thread
1 piece of scrap cardboard, large enough to slide inside the pant’s leg
steam iron

These are the specific sets of colors that I used to create my Painted Blue Jeans:

Colore Dual Tip Fabric Markers

Super Markers Fabric and T-Shirt Permanent Ink Pens

Best 24 Colors Fabric Markers

Sharpie Fine Point Markers, 36 piece set

Apple Barrel Acrylic Paint Set, 18 Piece

 

free painted blue jeans patterns

Step 1:  Pre-wash your jeans to remove any starch or stabilizing chemicals.  Dry the jeans thoroughly before you begin painting.

Step 2:  Download your copies of our Free Doodle Patterns, here on LSIrish.com.  Type doodles into the search box in the header.  We are on numbers 040 to 042 today, which should give you a nice selection of designs to use.

Step 3:  Cut the scrap cardboard to fit inside of the pant’s leg, so that one end of the cardboard comes out the pant’s leg at the bottom.  You can move this cardboard as you work to protect the jeans from color blending through to the other side of the jeans.

Step 4:  With a black fabric marking pen begin doodling … use a light pressure on the pen tip for the smoothest and fullest line coverage.  Mix your main designs with long flowing line breaks and fill patterns.

Step 5:  With the pale-blue fabric pen, fill the areas around your main designs with a tight dot pattern.  Let the space between the dots increase as you move away from the central line of the design.

Step 6:  With the medium-blue fabric pen, re-work the central area of the background with tightly packed dots.

Step 7:  Using a fine-point black fabric pen, work a fill pattern over the pale-blue and medium-blue dot patterns.  I used small, tightly packed circles.

Step 8:  Set your fabric pen colors according to your package directions.  My set only required a hot, steam pressing to become permanent coloring.

Step 9:  Flip your jeans over and do the back side of the leg.

Step 10:  You can create doodle designs on  the 6 1/2″ square white cotton fabric pieces using this same method.  Fill in some areas of your pattern with the bright colors from your set.  After the patch has been hot, steam ironed it is ready to sew into place, anywhere on your doodle jeans.

free painted blue jean patterns

 

Free Doodle Pattern #040

 

Free Doodle Pattern #041

 

Free Doodle Pattern #042

 

Art Designs StudioFor more great pattern ideas for your painted blue jeans, please visit ArtDesignsStudio.com

 

1+

Doodle Wind Chimes, Free Craft Project

Doodle Days #12 –  Wood Burn Spoons, Wood Carved Spoons, Leather Work, Free Lora S. Irish Patterns to Download, DIY Bookmaking, Bullet Journals, Scrap Booking, Card Making, Applique Quilting, Pyrography, Wood Carving

Irish Doodle Pin Cushion Wind Chime

Doodle Days Clay Pot Wind Chimes

This wind chimes will add a touch of country delight to your back porch.  Its quick, easy, and fun to make a large set using graduated sizes of clay pots.

Supplies:

3 1/2″ clay pot
2 1/2 yards of 1/2″ wide burlap ribbon
2 yards of thin gray-brown twine
3 1/2″ gold-colored bells
1 – 3/4″ twine bead
acrylic glue
1 – bamboo kitchen skewer
fine-point marking pen
gold glitter glue

Step 1:  Download your free doodle patterns, here at LSIrish.com.  To discover more free patterns type doodle into the search box in the header of this page.

Step 2: Using a fine-point permanent marking pen, doodle around the lower section of the outside of your clay pot.  For contrast, leave the rim of the pot without decoration.  Work over some of your pattern lines several times to create a thick-and-thin outline effect.

Step 3:  Wrap the thin twin around the bottom edge of the rim three times.  Tie the twine tightly.  Use a few drops of acrylic glue to hold the knot and twine into place.  Allow the glue to dry.

Step 4:  Cut a 2 yard long piece of thin twine.  Thread the three gold-colored bells onto the thread, and move them to the center point of the thread.  Bring the two ends of the thread together, tie a knot with the two  threads about 1 1/2″ above the bells.

Step 5: Slide one 3/4″ twine bead onto the two threads and position the bead above the knot made in step 4.  Tie a knot in the threads that sits on top of the bead.

This wind chimes follows the same step-by-step instructions as
our Doodle Wind Chimes.  The free doodles where printed
on card stock paper, cut, and double-stick taped into place.
This is a quick wedding decoration.

Step 6:  Tie the two twine threads into a third knot the height of your clay pot  away from the top of the bead.  If your clay pot is 3 1/2″ tall, this third knot is made 3 1/2″ away from the bead.

Step 7:  Cut two 1 1/4″ long pieces from the bamboo kitchen skewer.  Tie one piece with a knot tightly above the third knot.  Slide the twine, from the inside to the outside, through the hole in the bottom of the clay pot.  Lay the second bamboo piece between the two twine ends, on the bottom of the pot, and secure with a tight knot.  These two bamboo sticks hold the bell clapper in place.

Step 8:  Hold one end of the burlap ribbon between your thumb and the side of your palm.  Open your fingers as wide as possible.  Wrap the ribbon over your fingers four to five times, leaving at least a 4″ long end.

Step 9:  Carefully remove the wrapped burlap ribbon from your hand and place it, centered, between the two twine threads.  Tie a tight knot in the twine to secure the burlap ribbons.

Step 10: Tie a knot in the twine threads 4″ to 5″ from what is now the top of your wind chime.  Clip the ends to about 1/2″ long.

Step 11:  Working one burlap ribbon loop at a time, turn each loop inside-out.  This gives your ribbon that lovely curl.

Step 12:  Use gold glitter glue to add little dots of bright, sparkling accents to your doodle pattern.  Allow  the glue to dry thoroughly, and your wind chime is ready to hang.

free tracing pattern
Free Doodle Pattern #037
Irish Doodle Pin Cushion Wind Chime
Free Doodle Pattern #038

 

 

 

 

 

 

 

Irish Doodle Pin Cushion Wind Chime
Free Doodle Pattern #039

 

Landscape Pyrography Techniques and Projects by Lora S Irish

0

Free Doodles Days #4 – Print and Color Envelope

Tuesday, Jan. 01 to Sunday, January 06, 2019
21 Free Irish Doodle Patterns, 2 Free Irish Project Patterns, and 2 Free Irish PDF Files

Jan. 01, 2019Artist Morgue File
 Irish Free Doodle Patterns 001, 002, 003, blank tag 1, and blank tag 2

 

Jan. 02, 2019Christmas Star Tags
 Irish Free Doodle Patterns 004, 005, and 006

 

Jan. 03, 2019Bullet Journaling
 Post #1 Irish Free Doodle Patterns 007, 008, and 009, blank journal pages

Post #2 How deep do I carve, Doodle Extras 001, 004, and 005

Your First Carving by LS Irish 

 Levels in Relief Wood Carving

 

ArtDesignsStudio.com

 

Jan. 04, 2019Leather Journal Covers
Post #1 Irish Free Doodle Patterns 010, 011, and 012

Post #2 Wood Carved Wood Spoons, 028, extra 002, and extra 003

Greenman Pyrography Leather Bullet Journal Project – Free Pattern

Pyrography Leather Griffin Journal  – Free Griffin Pattern

 

Jan. 05, 2019String Gourd Bird House Project
Irish Free Doodle Patterns 028, 029, and 030

 

Jan. 06, 2019 – Free Irish Doodle Envelope Patterns
Print, color, score, cut, fold, glue, and enjoy.

 

 

0
gourd art musical instruments

Creating Gourd Art Musical Instruments – Banjo

gourd art banjo

What happens when …

…you unite the joy of gourd art crafting, the joy of bright and vibrant colors, and the joy of music?  You create this joyous gourd banjo with copper wire strings.

An extra large kettle gourd with some damage around the stem area inspired this fun gourd musical instrument project.  While I did not take step-by-step photos … I was too involved in the fun of creation to remember … I will share four easy ‘secrets’ that made the construction quick and accurate.

Supply List:

The general supply list is posted on the image below.  Please click on this image and save it to your desktop.

Arteza Bone Folders (Set of 4)
Bare Copper Wire, Bright, 14 AWG, 0.064″ Diameter, 80′ Length
Bare Copper Wire, Bright, 18 AWG, 0.04″ Diameter, 195′ Length
Bare Copper Wire, Bright, 20 AWG, 0.032″ Diameter, 315′ Length
Jameco Valuepro 24BC 24 AWG Solid Bare Copper Bus Bar Wire 205′
Heavy Duty Muslin Clamps 4 1/2 inch 6 Pack
Liquitex Professional Flexible Modeling Paste Medium, 16-oz

 

gourd art banjo1. How to cut any gourd along a perfectly level, accurate circumference line.

Clean and prepare the outer surface of your gourd as you normally would.  Wipe any sanding dust from the outer surface with a damp cloth, then allow the gourd to dry completely.

Visually estimate where you want the cut line along the circumference.  Make a mental note as to which area of the gourd you will be using (the down side) and which area you will be removing (the up side).

Fill your kitchen sink 2/3’s full of water.  Hold your gourd throughout this step as level to your visual cut line as possible.  Place the down side – the side of the gourd that will become your project – into the water.  Push it down until the bottom is covered with water and the surface of the water is at your visual cut line.

Lift the gourd up from the water carefully.  Your gourd will have a perfectly level, perfectly straight, perfectly even wet line around the circumference of your gourd.  With a soft #2 to #4 pencil mark the edge of the wet line.  You are ready to  cut.

This is a great technique when you have an odd shaped gourd that has an un-level top.  Plunge your gourd into the sink water until the bottom sits firmly against the bottom of the sink.  The water line will now be an even measurement from the bottom of the gourd, making a perfectly level cut line.

gourd art banjo2.  How to sand any gourd top cut evenly and level.

While you are at the hardware store buying birch plywood for the face of your banjo, purchase three or four extra pieces.  You will also need two sheets each of 100-, 150-, and 220-grit sandpaper, spray adhesive, and 1″ wide masking tape.

Work in a well ventilated area. Lay a strip of masking tape along one edge of the plywood.  Your plywood is 12″ wide, while your sandpaper is only 11″.  The tape protects the extra plywood from the spray adhesive.

Spray an even coating of adhesive over the 12″ x 12″ sheet of plywood.  Lay one sheet of 100-grit sandpaper onto the board, aligning along the top edge – opposite of the tape.  Lay a second sheet of 100-grit sandpaper against the first, so that the entire board is covered with sandpaper.  Press firmly into place.  Remove the masking tape.  Let the adhesive dry well.

Cut off  the extra 4″ strip of extra sandpaper that extends off the board.

Repeat these steps for your 150- and 220-grit sandpapers.

Clamp the board to a firm surface, your work table.  You can lay your cut edge of the gourd onto the board and move the gourd in circular motions to evenly, and quickly sand the edge perfectly flat.  Work the gourd through the three stages of sandpaper grit, starting with the 100-, then the 150-, and finishing up with the 220-grit.

3. How to fill the joint line between the gourd’s cut edge and the plywood face.

Even with the most careful cutting and sanding you can have small gaps in the joint between the plywood face and the gourd walls.  Fill the gaps with Modeling Paste, also called Sculpture Paste.  This is a water-soluble, acrylic-based, medium thick paste that dries quickly and can be sanded smooth.

Follow the directions on your jar.  I prefer to lightly dampen the area that I will be filling.  I let the area dry until there are no shiny, wet spots then fill the area with a light layer of modeling paste.  Let this layer dry completely and lightly sand.  If the area is not completely filled I repeat the application.  Thin layers are easier for me to control, shape, and sand.  Plus thin layers dry more evenly than thick applications.

Modeling paste – sculpture paste – can be painted using your craft acrylic colors.  It’s perfect for those gourds that have rough or pitted areas on the surface!

A quick trick to insure that your jar of modeling paste lasts a long time is to thoroughly clean the jar rim and the inside of the lid after every use.  Cut a square of plastic clinge wrap about 2″ larger than the jar opening.  Place the plastic clinge wrap onto the jar’s opening, then put on the lid.  The wrap seals along the jar’s rim, preventing your paste from drying out.

Lora S. Irish patterns4. Save yourself time, worry, and fuse by using ArtDesignsStudio.com patterns!

Like many crafters you have only so much limited time to create and craft.  Do you want to spend that time actually working on your project or on researching, designing, and refining the pattern you will use?

We have over 3000 line art and craft patterns, ready to download directly to your home computer, in a huge variety of themes, ideas, and designs – Wildlife, Celtic, Wood Spirits, Architectural Accents, Landscapes, and so much more.

I use CP139 Henna Tattoos 1 and CP140 Henna Tattoos 2 from our Special and Miscellaneous Patterns Category for my Gourd Art Banjo.

0
Scroll to Top