Weekend Whittler #002
| Weekend Whittler Wood Carving Newsletter, 2014, Issue #002 | |
Carving Tool Handle Styles |
|
| Carving tools come with a variety of tool handle styles, let’s take this time to look at the most common and their specific uses. Shown in the photo above, left to right: palm grip, long straight handled, palm grip, tapered grip, and ergonomic. Palm handles have a short length from the shaft of the cutting blade and end with a wide, bulbous shape that fits in the center of the palm. The weight of your entire arm from the elbow through the hand is directed by the palm handle into the push cuts of the tool. Palm tools are perfect for long, straight, deep cuts that need a little extra pressure. Straight handled or long handled tools are griped with the handle reaching across the diagonal of the cutting hand palm. The handle is often 3/4″ or wider in diameter to insecure a solid grip. This handle grip places the cutting stroke in the hand and wrist and gives you total control over small, short, and delicate cuts. Pencil handled styled carving tools have a wooden or plastic handle approximately 1/2″ in diameter or less, much like a large kindergarten style pencil. These narrow long handles are great for very fine detail work because they are very responsive to small changes in your hand position against the wood. Thick, long, straight handles are used on carving tools to be worked with a leather or rubber mallet. The extra width prevents the handle from cracking after repeated mallet hits. Often a mallet handle tool will have one or more metal bands at the top of the handle to add more strength. |
Ergonomic tool handles are becoming more readily available for the hobby carver. This style is formed to fit within the spaces of your fingers to give a stronger grip during use. Ergonomic handles are not for everyone, they are not a one size fits all shape.If you have an average or large sized hand they work nicely, but often those with small hands will find the finger shapes along the bottom edge of the handle are too widely spaced for comfort. Most wood carvers will have a variety of tool handles in their carving kit, ready for use for each of the different types of carving needed to complete a project. There are several excellent beginner/intermediate tool sets on the market that can get you started. No matter which handle style you chose you can increase your gripping power by adding one or two wraps of flexible self-adhesive bandage around your tool handle. It is easy to apply, easy to remove, and if you have arthritis it can make carving much more comfortable for your fingers and joints.
|
| If you would like to comment on this issue of the Weekend Whittler Wood Carving Newsletter, please email our studio. Lora@ArtDesignsStudio.com |
|
| Copyright, Lora S. Irish, Art Designs Studio, 2014, All International Rights Reserved | |
 For more great e-Projects & e-Books visitArtDesignsStudio.com |
Chip Carving e-Project by Lora Irish37 page, PDF file format, e-project and the Supplies needed for chip carving
|
